下載咪嚕游戲盒
暢順運行proe5的電腦配置
proe5.0對配置的要求很低。內存建議2G。
否則頻繁使用虛擬內存的話，在使用proe的時候會經常短暫的卡死現象。以上的配置做簡單的工作是完全可以勝任了，但是復雜些的裝配，運行就會比較慢了。如果是做復雜的裝配的工作比較多，還是建議用臺式機或工作站的比較好，一體機也可以考慮。
proe5.0的最低配置要求：CPU:Pentium 266MHz處理器、內存：64 megabytes(MB)、硬盤：500MB空間、聲卡：Diretx Sound兼容、顯卡：Diect 3D(16MB以上）。
擴展資料：
因為正式版的Pro/Engineer WildFire的安裝都會提供不同語言的語言包，用戶在安裝的過程中可以選擇中文安裝，因此proe中文野火版實際指的是用戶在安裝Pro/Engineer WildFire的時候選擇了中文語言包而已。
Pro/Engineer在中國用戶的稱呼中存在著多種叫法，比如proe、pro/e、破衣等等，目前最新的WildFire5.0版本。
proe5.0該怎么卸載
proe5、0卸載方法如下：
1、建議用優化大師中的系統清理，軟件智能卸載；
2、選擇proe，點擊分析；
3、分析完畢后，點擊卸載，會出現是否卸載，點擊是即可卸載完畢。
4、再點擊金山衛士，QQ電腦管家，超級兔子或者360衛士，會出現軟件管理，卸載軟件，選擇proe點擊卸載；
5、卸載后會有一個剩余的文件清理窗口，選擇全部，點擊刪除即可。
proe5,0組件拉伸減材至下零件功能嗎
可以。Pro/Engineer5.0（也稱為PTCCreoElements/Pro）提供了組件拉伸減材至下零件的功能。該功能可以在零件設計過程中使用，通過將一個零件組件拉伸減材至另一個零件組件來創建一個新的下零件。此功能在設計復雜的機械零件時非常有用，可以大大提高設計效率。使用該功能需要謹慎操作，以確保拉伸減材的零件組件與目標零件組件之間的匹配度和接口質量。
proe5.0操作時會用到鍵盤上哪些按鍵
分兩種情況；
系統自帶按鍵，比如Ctrl，連續選擇多個圖元時要用到；shift選擇連續的兩條線為一條線時要用到，Ctrl+D恢復到默認視圖。CTRL+O打開文件
CTRL+N新建文件
CTRL+S保持文件
CTRL+P打印文件
delete刪除特征
CTRL+F查找
CTRL+D回到缺省的視圖模式。
CTRL+R屏幕刷新
CTRL+A窗口激活
CTRL+T,草繪時尺寸加強
CTRL+G,草繪時切換結構
CTRL+Z后退
CTRL+R前進
CTRL+ALT+a,草繪時全選
shift+右鍵約束鎖定
tab約束切換在裝配過程中對于還有自由度的零件,
CTRL+ALT+中鍵=旋轉零件
CTRL+ALT+右鍵=平移零件
CTRL+ALT+左鍵=旋轉和平移零件
shift+中鍵平移
CTRL+中鍵縮放
自己設置快捷鍵，比我在config配置文件里設置的：
!Creo快捷鍵 for LiuGong group 2012-2-18
mapkey$F5@MAPKEY_LABEL草繪-直線;~ Command `ProCmdSketLine` 1;
mapkey$F3@MAPKEY_LABEL零件-倒圓角;~ Command `ProCmdRound`;
mapkey$F4@MAPKEY_LABEL零件-倒角;~ Command `ProCmdChamferEdge`;
mapkey cd@MAPKEY_LABEL編輯定義;\
mapkey(continued)~ RButtonArm `main_dlg_cur` `PHTLeft.AssyTree` `node6`;\
mapkey(continued)~ PopupOver `main_dlg_cur` `ActionMenu` 1 `PHTLeft.AssyTree`;\
mapkey(continued)~ Open `main_dlg_cur` `ActionMenu`;~ Close `main_dlg_cur` `ActionMenu`;\
mapkey(continued)~ Activate `main_dlg_cur` `Redefine`;
mapkey$F6@MAPKEY_LABEL草繪-矩形;~ Command `ProCmdSketRectangle` 1;
mapkey$F7@MAPKEY_LABEL草繪-圓;~ Command `ProCmdSketCenterPoint` 1;
mapkey$F8@MAPKEY_LABEL草繪-動態修剪;~ Command `ProCmdEditDelSeg` 1;
mapkey$F9@MAPKEY_LABEL草繪-標尺寸;~ Command `ProCmdSketDimension` 1;
mapkey$F10@MAPKEY_LABEL草繪-投影捕捉;~ Command `ProCmdSketProject` 1;\
mapkey(continued)~ Move `useedge` `useedge` 2 27.649562 7.008761;
mapkey$F11@MAPKEY_LABEL草繪-約束重合;~ Command `ProCmdSketAlignConstr`;
mapkey$F12@MAPKEY_LABEL草繪-完成;~ Command `ProCmdSketDone`;
mapkey 5@MAPKEY_LABEL草繪鎖定尺寸;\
mapkey(continued)~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued)~ Close `rmb_popup` `PopupMenu`;~ Command `ProCmdEditUnlockLock`;
mapkey 6@MAPKEY_LABEL繪圖-附件;\
mapkey(continued)~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued)~ Close `rmb_popup` `PopupMenu`;~ Command `ProCmdDwgPopEditAtt`;#ON SURFACE;
mapkey 76@MAPKEY_LABEL繪圖-與視圖相關;\
mapkey(continued)~ Activate `main_dlg_cur` `user_custom_page_190295048_control_btn` 1;\
mapkey(continued)~ Command `ProCmdDwgRelToView`;
mapkey 78@MAPKEY_LABEL繪圖-與對象相關;\
mapkey(continued)~ Activate `main_dlg_cur` `user_custom_page_190295048_control_btn` 1;\
mapkey(continued)~ Command `ProCmdDwgRelToObj`;
mapkey 1@MAPKEY_LABEL基準面;~ Command `ProCmdEnvDtmDisp` 1;
mapkey 2@MAPKEY_LABEL基準軸;~ Command `ProCmdEnvAxisDisp` 1;
mapkey 3@MAPKEY_LABEL基準點;~ Command `ProCmdEnvPntsDisp` 1;
mapkey 4@MAPKEY_LABEL基準坐標系;~ Command `ProCmdEnvCsysDisp` 1;
mapkey sz@MAPKEY_LABEL設置工作目錄;~ Select `main_dlg_cur` `appl_casc`;\
mapkey(continued)~ Activate `main_dlg_cur` `main_dlg_cur`;~ Close `main_dlg_cur` `appl_casc`;\
mapkey(continued)~ Command `ProCmdSessionChangeDir`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;
mapkey xx@MAPKEY_LABEL拭除不顯示;~ Close `main_dlg_cur` `appl_casc`;\
mapkey(continued)~ Command `ProCmdModelEraseNotDisp`;~ Activate `file_erase_nd` `ok_pb`;
mapkey dd@MAPKEY_LABEL打開;~ Command `ProCmdModelOpen`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;
mapkey da@MAPKEY_LABEL打開零件;~ Command `ProCmdModelOpen`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\
mapkey(continued)~ Open `file_open` `Type`;~ Close `file_open` `Type`;\
mapkey(continued)~ Select `file_open` `Type` 1 `db_2`;
mapkey dz@MAPKEY_LABEL打開組件;~ Command `ProCmdModelOpen`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\
mapkey(continued)~ Open `file_open` `Type`;~ Close `file_open` `Type`;\
mapkey(continued)~ Select `file_open` `Type` 1 `db_1`;
mapkey dt@MAPKEY_LABEL打開圖紙;~ Command `ProCmdModelOpen`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\
mapkey(continued)~ Open `file_open` `Type`;~ Close `file_open` `Type`;\
mapkey(continued)~ Select `file_open` `Type` 1 `db_4`;
mapkey sa@MAPKEY_LABEL新建零件;~ Command `ProCmdModelNew`;
mapkey sd@MAPKEY_LABEL新建組件;~ Command `ProCmdModelNew`;\
mapkey(continued)~ Select `new` `Type` 1 `Assembly`;
mapkey st@MAPKEY_LABEL新建圖紙;~ Command `ProCmdModelNew`;\
mapkey(continued)~ Select `new` `Type` 1 `Drawing`;
mapkey wa@MAPKEY_LABEL在組件中新建零件;~ Command `ProCmdCompCreate`;\
mapkey(continued)~ Select `comp_create` `Type` 1 `a`;
mapkey wd@MAPKEY_LABEL在組件中新建組件;~ Command `ProCmdCompCreate`;\
mapkey(continued)~ Select `comp_create` `Type` 1 `b`;
mapkey zz@MAPKEY_LABEL關閉當前窗口;~ Command `ProCmdWinCloseGroup`;
mapkey qq@MAPKEY_LABEL組件-缺省裝配;\
mapkey(continued)~ Open `main_dlg_cur` `maindashInst0.constr_offset_type_2`;\
mapkey(continued)~ Close `main_dlg_cur` `maindashInst0.constr_offset_type_2`;\
mapkey(continued)~ Select `main_dlg_cur` `maindashInst0.constr_offset_type_2` 1 `Default`;\
mapkey(continued)~ Activate `main_dlg_cur` `dashInst0.stdbtn_1`;
mapkey ss@MAPKEY_LABEL打開選定元件;\
mapkey(continued)~ RButtonArm `main_dlg_cur` `PHTLeft.AssyTree` `node15`;\
mapkey(continued)~ PopupOver `main_dlg_cur` `ActionMenu` 1 `PHTLeft.AssyTree`;\
mapkey(continued)~ Open `main_dlg_cur` `ActionMenu`;~ Close `main_dlg_cur` `ActionMenu`;\
mapkey(continued)~ Activate `main_dlg_cur` `OpenModel`;
mapkey vv@MAPKEY_LABEL保存隱藏狀態;~ Command `ProCmdViewSaveLayStat`;
mapkey yy@MAPKEY_LABEL隱藏;\
mapkey(continued)~ RButtonArm `main_dlg_cur` `PHTLeft.AssyTree` `node2`;\
mapkey(continued)~ PopupOver `main_dlg_cur` `ActionMenu` 1 `PHTLeft.AssyTree`;\
mapkey(continued)~ Open `main_dlg_cur` `ActionMenu`;~ Close `main_dlg_cur` `ActionMenu`;\
mapkey(continued)~ Activate `main_dlg_cur` `HideFeat_PushBtn`;
mapkey tt@MAPKEY_LABEL取消隱藏;\
mapkey(continued)~ RButtonArm `main_dlg_cur` `PHTLeft.AssyTree` `node2`;\
mapkey(continued)~ PopupOver `main_dlg_cur` `ActionMenu` 1 `PHTLeft.AssyTree`;\
mapkey(continued)~ Open `main_dlg_cur` `ActionMenu`;~ Close `main_dlg_cur` `ActionMenu`;\
mapkey(continued)~ Activate `main_dlg_cur` `UnhideFeat_PushBtn`;
mapkey ch@MAPKEY_LABEL零件-草繪;~ Command `ProCmdDatumSketCurve`;
mapkey s1@MAPKEY_LABEL新建基準面;~ Command `ProCmdDatumPlane`;
mapkey s2@MAPKEY_LABEL新建基準軸;~ Command `ProCmdDatumAxis`;
mapkey s3@MAPKEY_LABEL新建基準點;~ Command `ProCmdDatumPointGeneral`;
mapkey s4@MAPKEY_LABEL新建基準坐標系;~ Command `ProCmdDatumCsys`;
mapkey ll@MAPKEY_LABEL測量距離;~ Command `ProCmdNaMeasureDistance`;\
mapkey(continued)~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued)~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued)~ Select `main_dlg_cur` `Sst_bar.filter_list` 1 `10`;\
mapkey(continued)~ Command `ProCmdSelFilterSet` 90;
mapkey ld@MAPKEY_LABEL測量直徑;~ Command `ProCmdNaMeasureDiameter`;
mapkey ee@MAPKEY_LABEL激活;\
mapkey(continued)~ RButtonArm `main_dlg_cur` `PHTLeft.AssyTree` `node27`;\
mapkey(continued)~ PopupOver `main_dlg_cur` `ActionMenu` 1 `PHTLeft.AssyTree`;\
mapkey(continued)~ Open `main_dlg_cur` `ActionMenu`;~ Close `main_dlg_cur` `ActionMenu`;\
mapkey(continued)~ Activate `main_dlg_cur` `MakeActive`;
mapkey cg@MAPKEY_LABEL插入復制幾何;~ Command `ProCmdOduiDsfCopyGeom`;\
mapkey(continued)~ Activate `main_dlg_cur` `maindashInst0.PGCheckButton` 0;\
mapkey(continued)~ Activate `main_dlg_cur` `maindashInst0.Open_ref_model`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `DLG_PREVIEW_POST` `file_open`;\
mapkey(continued)~ Trail `UI Desktop` `UI Desktop` `PREVIEW_POPUP_TIMER` \
mapkey(continued) `file_open:Ph_list.Filelist:<NULL>`;
mapkey g@MAPKEY_LABEL缺省放置-復制面組;~ Activate `cg_placement` `OKButton`;\
mapkey(continued)~ Activate `main_dlg_cur` `chkbn.References.0` 1;\
mapkey(continued)~ Trigger `References.1.0` `PH.Ref_Model` `0`;\
mapkey(continued)~ Trigger `References.1.0` `PH.Ref_Model` ``;\
mapkey(continued)~ Trigger `References.1.0` `PH.Ref_Model` ``;\
mapkey(continued)~ Trigger `References.1.0` `PH.SurfaceSetsList` `0`;\
mapkey(continued)~ Trigger `References.1.0` `PH.SurfaceSetsList` ``;\
mapkey(continued)~ Trigger `References.1.0` `PH.SurfaceSetsList` `0`;\
mapkey(continued)~ Focus `References.1.0` `PH.SurfaceSetsList`;\
mapkey(continued)~ Select `References.1.0` `PH.SurfaceSetsList` 1 `0`;\
mapkey(continued)~ Timer `UI Desktop` `UI Desktop`
鍵功能說明
F2拉伸曲面
F3倒圓角
F4倒角
F5草繪-直線
F6草繪-矩形
F7草繪-圓
F8草繪-動態修剪
F9草繪-標尺寸
F10草繪-投影捕捉
F11草繪-約束重合
F12草繪-完成
，繪圖-編輯剖面線-45
.繪圖-編輯剖面線-135
0繪圖-修改半徑尺寸引線類型
1基準面
2基準軸
3基準點
4基準坐標系
5草繪-鎖定/解鎖尺寸
6繪圖-編輯連接
76繪圖-與視圖相關
78繪圖-與對象相關
bb繪圖-創建全部球標
bc繪圖-標尺寸
bf繪圖-插入符號
bg繪圖-更改全部球標符號為標準符號
bj編輯
bv繪圖-顯示/拭除
cc保存文件
cd編輯定義
cf組件-重復
cg插入復制幾何
ch草繪
da打開零件
dd打開
dq繪圖-對齊尺寸
dt打開圖紙
dw模型樹中定位特征
dz打開組件
ee激活
er草繪-中心線